Not to burst anyone's bubble but isn't 1:42's a fast time for ITA?
Not to burst anyone's bubble but isn't 1:42's a fast time for ITA?
Christian in FL | Something white with Honda on the valve cover...
FASTtech Limited- DL1, Schroth, & Recaro Goodness
LTB Motorsports- The Cheapest Place for Momo
TrackSpeed Motorsports- OMP, Racetech, & Driver Gear
Kevin
2010 FP Runoffs & Super Sweep Champion
2010 ITB ARRC Champion
2008 & 2009 ITA ARRC Champion
'90 FP Acura Integra RS
'92 ITA Acura Integra RS
'92 ITB Honda Civic DX
I can't sort out if I'm looking at 08 rules with proposed revisions for 09 or 07 rules with revisions for 08... regardless, it looks like the 2.0 cars were at 2650 and the 2.2's at 2750 but both received 75# weight drops at some point. WAAAAAAAY under the ITR weight. But, hey, at least they can run at the pointy end of ITA
Christian in FL | Something white with Honda on the valve cover...
FASTtech Limited- DL1, Schroth, & Recaro Goodness
LTB Motorsports- The Cheapest Place for Momo
TrackSpeed Motorsports- OMP, Racetech, & Driver Gear
Yea, the car I am interested in is a 2600lb car and I must say that I am a little skiddish about adding 400lbs to run ITR. Sounds like S2000's are NASA cars. Oh well
Rob Bodle
Rob Bodle Images, LLC
RBI Competition
2007 ARRC Three hour "not a real" Enduro ITO Co-Champion.
2009 ARRC ITO Champion.
2009 ARRC Enduro Pole Winner
2010 ARRC ITO Champion(car owner for Cliff Brown)
2011 ARRC ITO Champion
Josh Sirota
ITR '99 BMW Z3 Coupe
I seriously doubt that a motor that won so many awards for the most HP per CC in history is going to get much more in IT trim. We might have some future Formula 1 engineer among us--who knows? Same for the RX8 which is weighted in IT trim to get the same HP numbers as a prod motor. When you get cars classed by just power/weight the tires become a big issue on the heavier cars.
Process weight for the S2000 is correct by todays formula.
Steve Eckerich
ITS 18 Speedsource RX7
ITR RX8 (under construction)
Bookmarks