Wheel question...

[xr4racer]

I run 94-98 Mustang V6 aluminum wheels, they have almost exactly a 5" backspace. 15x7, very cheap (craigslist, junkyards, ebay etc) and weigh around 13 lbs. You do not use a spacer at all.

matt

[VinnyV81]

I run 94-98 Mustang V6 aluminum wheels, they have almost exactly a 5" backspace. 15x7, very cheap (craigslist, junkyards, ebay etc) and weigh around 13 lbs. You do not use a spacer at all.

matt

does it matter what style wheel it is?

And your sure this will work on a second gen? I HAD to run 1/2 inch spacers with the vert wheels because they would not clear the sleeves on my coilovers.

Thanks for everyone's help.

[xr4racer]

Just get stock Mustang V6 wheels, they are all 3 spoke, they made a few different designs between 94-98 or so. They fit perfect with the 24mm offset, no spacer is needed, no longer studs etc. I have used them for 10 years with 225/45/15 Hoosiers.

matt

[VinnyV81]

Only problem with that is that those wheels are so UGLY!!! LOL

I will definitely look into to picking up a set of those if nothing else.