Quote Originally Posted by mlytle View Post
if the flex has started, repair is needed. the repair is the installation of the factory plates that weld on around where the mounting studs/bolts go into the chassis. the plates are readily available at any dealer or place like bimmerworld. they are cheap too, like $20. the cost comes in labor to drop the subframe and weld the plates on, if you don't do this yourself. it really isn't that hard. nor is it necessarily required.
Marshall, I'm genuinely curious -- what document makes this repair legal on an IT 325i?

FYI, the Z3s have a different rear suspension design altogether, but have a very similar failure. When the bushings get worn, the rear subframe moves around a lot and can basically destroy the trunk floor. It's really ugly, much uglier than the E36 failures, when it happens. However, unlike with the 3-series, there is no reinforcement available from another BMW model. There is reinforcement available in the aftermarket ... of course, that reinforcement would be totally illegal in IT.