Preface that I'm not a cage builder. But, I have done a lot of welding close to things that need protection so I do have experience with this. Buy one of those kevlar welding blankets at your welding supply.
Preface that I'm not a cage builder. But, I have done a lot of welding close to things that need protection so I do have experience with this. Buy one of those kevlar welding blankets at your welding supply.
STU BMW Z3 2.5liter
If it's a quick welding job I use wet cardboard but if it's going to take a while then a proper welding blanket is advised.
1988 ITA Scriocco 16V #80
MCSCC member since 1988
Thanks. Any suggestions on attaching/supporting the welding blanket over the window/windshield? Although as I think about it, you probably just hang it as a "curtain" between the welding and the window in question.
On a related note, how far away does one have to protect? Or to put it another way, how far will spatter fly?
Thanks again.
Rory
3M™ Welding and Spark Deflection Paper, 05916
where does one get that? Welding supply store perhaps?
Online; try Eastwood
Eastwood has it listed, summit does not. (I thought Summit bought Eastwood and sold everything on summit's site as well?)
It's expensive, but it's the right thing to use for glass and paint. I REALLY wish I had. also note you need it when grinding too. I've destroyed several windows just grinding in the area (some VERY hard to replace- like a 63 1/2 Galaxie windshield!)..
When arc and MIG welding, a couple feet horizontal clearance is about all you need. If TIG, it's not really an issue since you shouldn't have metal flying around.
When grinding, any exposed glass within 10-15 ft needs to be covered since those damn sparks fly everywhere and in every direction!
Houston Region
STU Nissan 240SX
EProd RX7
Bookmarks