Mine's still in the car. As part of the offseason weight reduction plan, I assumed you could take it out and started to, but then checked the rules. Didn't see anything.
THoughts?
Mine's still in the car. As part of the offseason weight reduction plan, I assumed you could take it out and started to, but then checked the rules. Didn't see anything.
THoughts?
NC Region
1980 ITS Triumph TR8
I don't think so. I left mine in until it became an STL car.
Mine's in the car too but I have to add over 200lbs in ballast.
Having said that, I like the noise reduction and water seals that come with it. I know you are searching for ounces to turn into pounds but I like it in there.
that's what it looked like to me.
NC Region
1980 ITS Triumph TR8
I read 9f under 9.1.3 saying I can remove them. They weighed nothing but were poorly reinstalled once on my car after a poor removal and were falling off.
Its a cleanliness thing for me. I need plenty of weight. I left the plastic clips incase I get protested.
I believe them to be insulating for the interior trim
Hoo boy. Here we go again...
hahaha
PROTEST ME. (or please don't I'm new to this)
"carpets, center consoles, floor mats, headliners, sun roof liner and frame, dome lights, grab handles, and their insulating , attaching, or operating mechanisms may be removed"
"all other interior trim panels except the dashboard may be removed"
gravity was removing them already. I just helped them along
Last edited by adamjabaay; 01-06-2013 at 11:00 AM.
I was completely kidding sir......haha
if ya'll seriously think its a problem I'm 100% heading to a junkyard to properly pull off weatherstrip so it won't be falling off and pinched between the door and rocker making the door tough to open....lol
that really was the reason I yanked it... I thought it was accepted too, from looking at other cars
I bought a car that was a cosmetic mess, and had been driven hard and put away wet. The cage ans drivetrain were all it had going for it. I like decent looking cars and tidy looking stuff, so after updating the cage a bit, I started making it look like less of a circle track throw away and more of a picture worthy car I can be proud of.
building a "rule pusher" isn't my goal at all, in any way
Last edited by adamjabaay; 01-06-2013 at 02:34 PM.
Ha, don't look at other cars to see what's legal, look at the rulebook and decide for yourself with your reasoning and go from there. Most modifications like this in the paddock are done with 'convenience' and 'it's nothing that makes me go faster' as the 'reason'. Not because anyone actually thinks it's legal.
ONe time, in band camp....
back when I ran in ITA, my lil ole RX-7 was getting it's ass whipped by the likes of Blaney and Serra, etc. We had an impound all. I finished a whopping 5th, I think, and it was "hoods up". Tech guy comes over, and tells me the two 6" long rubber seals located at the back corners of my hood were mia and needed replacing before the next race. Easy to do cuz they were in my garage and never got snapped back on in the rush after a full paint job. But that pretty much reinforced for me that all seals must be there.
I was impressed he even spotted them missing! I figured I fell into the "nobody gives a crap about that car " crowd, LOL.
Jake Gulick
CarriageHouse Motorsports
for sale: 2003 Audi A4 Quattro, clean, serviced, dark green, auto, sunroof, tan leather with 75K miles.
IT-7 #57 RX-7 race car
Porsche 1973 911E street/fun car
BMW 2003 M3 cab, sun car.
GMC Sierra Tow Vehicle
New England Region
lateapex911(at)gmail(dot)com
awwwwwww MAN.
I can never find time to go to the junkyard. Stupid real life jobs. Haha
thanks Jake
everyone else agree?
Adam,
what are you missing? i might have some stuff on my HF POS i am parting out....
1985 CRX Si competed in Solo II: AS, CS, DS, GS
1986 CRX Si competed in: SCCA Solo II CSP, SCCA ITA, SCCA ITB, NASA H5
1988 CRX Si competed in ITA & STL
The perimeter door weatherstripping and hatch perimeter weatherstripping
FYI.
i am not a big fan of rules that say "etc." (my emphasis.) and then we try discern what that etc means...
from page 113 of 7842 in the 2012 GCR
In Improved Touring, Showroom Stock, Spec Miata, and Touring the door window glass, window operating mechanism, inner door trim panel, armrest, map pockets, wiring harnesses for door locks, windows, power mirrors, seat wiring, etc., and inside door latch/lock operating mechanism may be removed and the inner door structural panel may be modified, but not removed only if the door bars extend into the door cavity.
1985 CRX Si competed in Solo II: AS, CS, DS, GS
1986 CRX Si competed in: SCCA Solo II CSP, SCCA ITA, SCCA ITB, NASA H5
1988 CRX Si competed in ITA & STL
I agree. My preference is to write a rule to say what you mean, then use "e.g." to provide non-limiting examples. "Etc" leaves a big hole to drive through. In this case:
NASCAR-style side protection or one bar bisecting another to form an “X” is permitted. Door side tubes may extend into the front door. To facilitate installation of these door side tubes into the door, Improved Touring, Showroom Stock, Spec Miata, and Touring may remove interfering items, e.g., the door window glass, window operating mechanism, inner door trim panel, armrest, map pockets, wiring harnesses for door locks, windows, power mirrors, seat wiring, and inside door latch/lock operating mechanism; the inner door structural panel may be modified, but not removed, only if the door bars extend into the door cavity.
In the real world.. most anything that burns can be removed and pass tech, and fellow racer tech. IMHO.
I left my rubber seals in for the IT cars.
The cage door bar rule is not followed at all either.
I hammered,slotted,etc the OE inner panels, for years to meet the letter of the rule . Now I just X brace the pas side and toss the inner panel, as does the rest of the world. Time to fix the rule wording .
IMHO.
"Nobody" leaves the inner panel in today.
..
Mike Ogren , FWDracingguide.com, 352.4288.983 ,http://www.ogren-engineering.com/
My bars both extend ALL THE WAY on both sides now, basically touching the factory crush beam in the door. I re installed the outer stripping around the window, i had only removed that "inner" gasket strip. The certainly can burn. Im not likely to win anything anyways so maybe ill leave it. Haha
Ah... yeah, let's not generalize. I have the passenger inner panel of my door installed because I have an X bar and decided not to put in an alum metal cover.
Some racers do try to follow the rules with integrity no matter how annoying and even if some others purposefully choose not to.
Demetrius Mossaidis aka 'Mickey' #12 ITA NESCCA
'92 Honda Civic Si
STFU and "Then write a letter. www.crbscca.com"
2013 ITA NARRC Champion and I have not raced since.
Bookmarks