Originally Posted by
tyler raatz
That's no big deal, throw the rotors on a lathe and machine off 2mm from the OD, taper the outer edge of the pads to match. You will never miss that 2mm of rotor.
cmon... that's a whopping 1/4 sqin of swept area... worth at least a second per lap!
.
Glenn Lawton
GSMmotorsports
#14 ITS RX7
NARRC ITS Champion 2012
NERRC ITS Champion 2013 12 11 10 09 08
NERRC STU Champion 2010
__________________
Bookmarks