Results 1 to 20 of 516

Thread: ITS Ford Mustang(s) Build - Stripper Stang Part II

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #34
    Join Date
    Jul 2004
    Location
    Raleigh NC
    Posts
    3,682

    Default

    The motor is apart and all pertinent parts down to the machine shop. Today we checked the rotating assembly for initial balance in the configuration that it failed. It did have a minor imbalance. Also this week, the driveshaft was checked for balance, It was found to be seriously out of balance and definitely contributed to the odd vibrations and failed transmission in the red car. Check and double check the balance of stock drive shafts.



    Two new Mustang motors are underway and we're pretty sure we'll put down more power than we did with V1.0. VTEC Yo! and the Tumbling Doritos best watch out!
    Last edited by Ron Earp; 11-11-2012 at 05:18 PM.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •