The front suspension of this car has been a bear. This weekend we've finally managed to get all the parts on the car, in the proper configuration, and give it a test. We were really pleased with the results. Spring angles are great, ride height is where we want it, and the sway bar geometry is correct. Not sure we could have done much better with what we've got and it is always a pleasure to have things work out the way you want.





The rear has been bolted up for quite sometime but nothing was aligned or adjusted. Making some careful measurements at ride height I've got the pinion angle set right around two degrees which should be a good starting place for adjustments and dyno work. It takes a lot of time to work this stuff out and it can be quite frustrating.