What a day. Jeff G and I started up around 830 and didn't knock off until after 6pm. Main tasks were fabricating more lower control arms as the geometry of the ones we made last week didn't work out so well at ride height and with any sort of normal springs we had available. So, the front of the red car had to be taken apart.
After much time measuring, cutting, fabricating, and grinding I think we've got two pairs of arms that have good geometry for the spring and will take a spring in the 9-9.5" range. Heck, I know it doesn't look like we did much but we're beat. The problem with the original arms we doctored is that we should have angled the adjustable threaded portion in a little to point toward the top perch at ride height. The Mustang in street trim uses a super long and soft spring that they simply allow to curve, something you don't want in a race car.
We also tried fitting up some brake ducts that we bought which were "race proven" and "guaranteed to fit". They don't. We had to cut those up and once the TIG is repaired we'll stitch the pieces back together they way they should be. Kenny Brown ducts don't fit for squat on a 94-98 V6 car, despite what they claim. They foul the caliper and are clearly made for a larger brake rotor. But, we'll make them fit.
It is done. But we charge admission for some views!Originally Posted by lateapex911
Reply With Quote
Bookmarks