Abhi
I think it will depend on what group you want to run in and if you expect to cross-over. Based on the few weekends you ran in ITA last year you seemed to enjoy the group, fellow competitors, and the racing.
Abhi
I think it will depend on what group you want to run in and if you expect to cross-over. Based on the few weekends you ran in ITA last year you seemed to enjoy the group, fellow competitors, and the racing.
Jim Alley
1990 ITA Miata
Its all about doing your personal Best
So you have the basic bolt-ons and an ECU. You still have to find about 8whp in all the little things like compression bump, exhaust tuning, etc. It's a tough road but it's there. If you hit 130+whp, start spending your money elsewhere.
Like springs, shocks and bars. Splitter to get the air away from the big front tires that will hog the air...
Thanks Andy , I'm always asking myself the benefits of doing a proper suspension. Are you aware of a splitter solution , or do I need to got dig out my jigsaw ?
Tires : Oh yeah , could always use some fresh rubber ... Like most of us , I save my best rubber for the most competitive races and run on junk the rest of the time.
Practice : Of course , can always use more laps. I'm fortunate enough to instruct with a DE group , so I can get laps. We have several competitive miata guys in the group so we pound around and critique each other.
Do you run As on the Miata especially at tracks that aren't so harsh on tires? I would imagine the Miata would handle them. (More of a question for Andy.)
Dave Gran
Real Roads, Real Car Guys – Real World Road Tests
Go Ahead - Take the Wheel's Free Guide to Racing
I run the Goodyears. The A tires could be run without issue up here in early Spring and Fall.
And I have busted 2 splitters, a friend has taken out 1. Hve a spoiler now that needs a forgiving splitter.
Jim,
I really did enjoy running with the ITA folks. It was close racing but without the unecessary contact and intensity in SM.
Also, I like the variety of running against different cars.
I am bringing the car down to Matt's soon and will call Andy to get his advice on priorities for "most bang for the buck".
My goal is to get most of it done by year end and then send the car down to Florida and run some races there. I will probably base it at the Skipbarber facility at Sebring or Road Atlanta and run out of there.
At this point I need to work on the driving as well as developing the car.
Thanks
Abhi
1 - SM6 Hoosiers (something like 75% or less the cost of 225 A6s);
2 - Leave the Spec suspension in until you see how/what the SM boys do with the Spec suspension on Ho-Hos;
3 - Header and intake for a handful more ponies;
4 - Megasquirt for tuning;
5 - "Profit".
But you knew all that already.
Later, if you decide to go full-boat on the ITA effort, you can develop the car for 225 Ho-Hos with better springs/shocks, lighter wheels, full-up IT engine build, etc.
Do the easy stuff, then shut up and drive (and have fun).
GA
In SEDiv, I've owned parts of 2 SMs and have run SM a fair amount, in addition to the ITS car.
VASTLY prefer IT. Cars are different enough that the racing is more interesting to me. More importantly, in SM, since the cars you are running with are all equal (but don't get me started on "pro" motors), you CANNOT lift. If you do, you lose everything you worked to gain over the preceding 4-5 laps in a just a split second.
I hate that really, and it breeds some of the contact, which becomes necessary due to the fact that NO ONE can lift at risk of blowing a sprint race.
IT? We race hard but generally give room and have a blast. Welcome.
NC Region
1980 ITS Triumph TR8
how about this one?
http://cafephoto.smugmug.com/LoneSta...319909_FFqXjn2
Brian Laughlin out of Tulsa, OK. He says the car is fully ITA legal, but I wasn't aware you could turn your IT car into a platypus...
Houston Region
STU Nissan 240SX
EProd RX7
I believe I trump you both. In my RX-7, it seemed I blew up an expensive, Flatout-made fiberglass splitter at every race. And the car ran hot as hell without it.
I'm just running the OE chin spoiler on the S2000. I think the car would benefit from a splitter, but I don't know if I can afford one a weekend ...
Steve Ulfelder
Author of Purgatory Chasm and The Whole Lie
www.ulfelder.com
That's the ISC version that I used as well.
4 ways to determine legality: Look at it from the top of the car, if you can't see it, legal. Can't be lower than the bottom edge of your wheels. And can't be further back than the trailing edge of your front fender...and finally, it should be attached in some way to your front facia/bumper cover. All IIRC.
I've had really good luck with the Tougerun G-style spoiler.
Mitch
#64 ITA Miata
#64 FP Miata
Mannschaft Schwartz Auto-Rennen
http://www.youtube.com/user/red986s1
Nothin' like a shameless plug, eh Andy??
Jeff L
ITA Miata
2010 NARRC Champion
2007 NERRC Championship, 2nd place
2008 NARRC Championship, 2nd place
2009 NARRC Championship, 2nd place
Bookmarks