Well silly me waited until the week of the ARRC to figure out my kill switch, I THOUGHT it was going to be easy but underestimated it. I made a switch panel a while back from my ignition switch and thought I could combine that wiring (the switch that kills pump and what not) to my battery kill switch and be golden, sadly I was wrong.

I have a two terminal switch. I see people use ones with 4 and 6 sometimes, so is there anyway to do it with just two?

If I wire my hot alternator wire directly to my battery then run that cable to one side of the switch and run the other side of the switch back to the alternator and + battery terminal in the fuse box would that kill it?

At least everything else is ready.