just wondering if anybody had an idea on a rotating assembly for a b18a1 that is scca ita legal.
just wondering if anybody had an idea on a rotating assembly for a b18a1 that is scca ita legal.
How about the Eagle rotating assy?
Dan Deyo
92 Acura Integra
ITA #94
hi dad lol
Doh
Dan Deyo
92 Acura Integra
ITA #94
Don't think I understand the question. You have to use OEM internals of everything in an IT engine, except .040" overbored (max) pistons, which must otherwise be "OEM-style" in every other dimension and design.
Kevin
2010 FP Runoffs & Super Sweep Champion
2010 ITB ARRC Champion
2008 & 2009 ITA ARRC Champion
'90 FP Acura Integra RS
'92 ITA Acura Integra RS
'92 ITB Honda Civic DX
Demetrius Mossaidis aka 'Mickey' #12 ITA NESCCA
'92 Honda Civic Si
STFU and "Then write a letter. www.crbscca.com"
2013 ITA NARRC Champion and I have not raced since.
"Experts from the street scene" will say swap, turbo, nitrous, or any combination of the three. I've built B18A/B IT engines, Prod engines, and "street" engines - completely apples to oranges on all three. Today I'm actually installing a fresh "turbo build" B18B into a Civic that's going to be pushing about 14psi of turbo'y goodness - wooosh!
Kevin
2010 FP Runoffs & Super Sweep Champion
2010 ITB ARRC Champion
2008 & 2009 ITA ARRC Champion
'90 FP Acura Integra RS
'92 ITA Acura Integra RS
'92 ITB Honda Civic DX
but it does say we can run Factory replacement pistons or their equivalent
with the exception of diameter shall be used. Cast or forged
equivalent pistons shall provide the same dome/dish/valve relief
configuration, ring groove width and spacing
Which is exactly what Kevin said above...
Christian in FL | Something white with Honda on the valve cover...
FASTtech Limited- DL1, Schroth, & Recaro Goodness
LTB Motorsports- The Cheapest Place for Momo
TrackSpeed Motorsports- OMP, Racetech, & Driver Gear
so even if the eagle crank is the same weight stroke as factory its prohibited ? just looking for a cheaper replacement than a oem acura one and they can come balanced
You don't just want the crank balanced, you want to balance the flywheel, pp and front pulley with the crankshaft. Plus every Honda crank that I have put on a balancer is already balanced.
Blake Meredith
thanks for the input
Bookmarks