So what exactly does this mean? I have a FIA seat on a stock seat "slider". Is an ITR 300zx a FIA homologated race car? Do I have to change something?
I have no seat back brace, and the seat is mounted on the side mounting points to tabs welded to the seat rails.
9.3.41. SEATS
The driver’s seat shall be a one-piece bucket-type seat and shall be securely mounted. The back of the
seat shall be firmly attached to the main roll hoop, or its cross bracing, so as to provide aft and lateral support. Seats
homologated to and mounted in accordance with FIA standard 8855-1999
or.FIA.Standard.8862-2009 or higher need not
have the seat back attached to the roll structure.
Seats with a back not attached to the main roll hoop or its cross bracing
may not be mounted to the stock runners unless they are the FIA homologated seats specified in an FIA homologated race
car.
The homologation labels must be visible. Seat supports shall be of the type listed on FIA technical list No.12 or No. 40
(lateral, bottom, etc). Passenger seat back – if a folding seat, it shall be securely bolted or strapped in place.
Item 3.
Bookmarks