Results 1 to 10 of 10

Thread: Making a Sentra turn

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #6
    Join Date
    Jun 2001
    Location
    Falls Church, Va
    Posts
    248

    Default

    I have a B14, but the same applies.. First, Greg is right on, "IF" you have the kind of money it takes to get there...

    I run on a limited budget, and can't afford a Greg solution. Here is my list.


    • Off the shelf Megan coilovers (ya, I heard all the rumors, and yes, they are working pretty well)
    • upgrade rear springs to 550. I am running 425 fronts
    • Progress rear sway bar set to full stiff
    • poly bushings all around
    • rear beam bent straight (applies to B14 only)
    • Run 1/16th toe out on front
    • remove front swaybar and use as clothes hanger
    • hot tire pressures 42F/44R

    Each one of the above steps have resulted in less push. This is my first season, and I run mid-pack, 2-4 seconds a lap off the leaders depending on the weekend.

    When I have the cash, I will upgrade the shocks to handle the Greg Amy spring rates.
    Last edited by EV; 07-09-2010 at 10:11 AM.
    Enjoy,
    Bill

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •