Results 1 to 12 of 12

Thread: Ford Contour V-6 (non-SVT)

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    May 2007
    Posts
    15

    Default

    Quote Originally Posted by Super Swift View Post
    The 1995 Contour V-6 (non-SVT) is already classified @ 2665lbs in ITS...

    No need to request anything... The car has been classed for years.
    I know.... That is why I specifically asked why ONLY the 1995 was classified.... lol

    My question was why the later models (specifically 1998+) Non-SVT's are NOT classified.

    So, I guess the question is. Would it be best to just request the later non-SVTs to be classified, or to also request the non-SVT's be moved to IT-A .. hahaha
    Eric Chance - Chattanooga Region
    - Still .... Currently Shopping for first IT Car!!! -

  2. #2
    Join Date
    Jul 2006
    Location
    Silicon Valley, CA
    Posts
    1,381

    Default

    Quote Originally Posted by ewchance View Post
    I know.... That is why I specifically asked why ONLY the 1995 was classified.... lol

    My question was why the later models (specifically 1998+) Non-SVT's are NOT classified.
    I'm sure that's just due to lack of attention and the lack of anyone who cared. To get the other years listed, just submit a letter (http://www.crbscca.com) asking to add the years.

    Please be as specific and thorough as you can be with respect to differences between the years. If there was any change in the engine at all, talk about it. If you have service manual data that can back it up, let us know, best case provide copies of the relevant pages. And if the later years are different enough from the 1995 that they need to be on a different line due to different specs, different bodies, etc, then please fill out a VTS sheet (available on the "Cars & Rules" page of the Club Racing website on scca.com) and submit that with your letter too.
    Josh Sirota
    ITR '99 BMW Z3 Coupe

  3. #3
    Join Date
    May 2007
    Posts
    15

    Default

    hmmm interesting, I am not sure if it would need another line in the GCR, but I bet it would due to body changes etc...

    But anyways, I think iambhooper answered my question ... lol

    I'll let my buddy with the Contour know its not classified because no one has thought to request it! And now I know how to request it!!! hahaha!

    Thanks guys!
    Eric Chance - Chattanooga Region
    - Still .... Currently Shopping for first IT Car!!! -

  4. #4
    Join Date
    Nov 2007
    Location
    South of Chicago, near Indiana.
    Posts
    248

    Default

    I don't think you would need another line. While the front and rear did get a restyle in 1998 the bodies stayed the same, only the bumper caps, hoods, trunk, headlights changed. As for brakes & drivertrains, that remained unchanged for the 6 years the car was produced. 170 HP for the V6 & the same trans & ratios. The same holds true for the 4 cyl cars.
    1988 ITA Scriocco 16V #80
    MCSCC member since 1988

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •