Del-Sol Spring rates

Based on what most similar chassis A cars are running, I'd say 600-700 front, 900-1100 rear would be a good ball park.
 
This ^^^^ should get you into the ballpark. Any idea if you can make the chassis stiff enough to handle those rates or are you just going to turn the chassis into the "spring"?

Christian
 
Thanks guys for the info,, Looks like any other Honda/Acura setup.
FYI. Will be using 750R 550 F 20mm front bar.. 22mm rear bar Koni yellow race re-valved.
Yes the cage was tuff to build . Height was the worst part.
You have to gutt roof locks and weld in roof to get enough height
 
Thanks guys for the info,, Looks like any other Honda/Acura setup.
FYI. Will be using 750R 550 F 20mm front bar.. 22mm rear bar Koni yellow race re-valved.
Yes the cage was tuff to build . Height was the worst part.
You have to gutt roof locks and weld in roof to get enough height

care to show pics of the build thus far?
 
Thanks guys for the info,, Looks like any other Honda/Acura setup.
FYI. Will be using 750R 550 F 20mm front bar.. 22mm rear bar Koni yellow race re-valved.

That'll be a decent jumping off point but definitely too soft, IMO.
 
You could be rite thats its to soft . I just happen to have that spare set of springs to start with . I would think personly that 900F/700R is more what I need But those rates will requir more shock than the KONIS. It will be ok to test with in April.I will Post pics of the build soon .There arnt many ITS Del Sols out there . I also have a 96 GSR in the build prosses as well, will be HC1 . Check out my albums
Thanks Guys:smilie_pokal:
Stormpower Race Engines
 
Last edited:
A race valved Koni Yellow will easily handle 1000lbs - I've been doing it for years on my ITA car. I'd take those 750's you've got and put them in the front, buy a set of 1000's for the rear (come on, they're like $100 a pair), use nothing but the stock front bar, and something huge as the rear bar. Just my opinion.

I've said for years that I'd love to see someone build a Del Sol Si for ITA. Exact same drivetrain and weight as the "EG" Civic EX/Si, but 10 inches shorter. Same great straight line scoot, but with a CRX ability to change direction. Hell yeah. Plus it would just be a cool, different car. As for building a Del Sol VTEC for ITS, I'm sorry, but I just don't think that B16 will ever be fast enough in a straight line to accomplish a whole lot. Sorry, but the 2.3L Prelude Si is only 130lbs more, and it will downright MURDER a B16.
 
There was an ITS DelSol built by Mike Cottrell here in Atlanta quite a few years ago. I think the consensus was that it was a bit underpowered for "S". More importantly, I remember that it was constantly having hub issues. I think it even lost a wheel or two at speed.
 
Thanks R2, Your advice is good, I do like the idea of the really stiff springs .Here in the Pacific North West . Tracks such as Pacific Racway are ruff and require a softer set up . I already have 3 championship ITA Crx-Si s , The Del-Soll will be a challenge and it will give up some straight line speed. I believe that it can qualifie on the pole up here with the ITS cars we have here. If prepared well and raced smart it can do well . The Beemers have an advantage with that big six .and if they sandbag me at the apex iam done .. will not let that happen LOL ... This build is somthing i wanted to do for a while . The car will run in 2 seperate classes . Here in Canada it will run in Improved production 2 . and will not get beat . the strongest cars are 3rd gen Intergras .
I do have a 32mm solid bar i could use if needed, and yes springs are cheap .There will be some changing development done on the car as it is raced . I just need a starting set up to get it on the track in Apr. The power to weight is verry good with the V-Tech power b16. As i said it will be a challenge and iam up for it .
I will post pics of the build soon . If anny thing it will be a fun and fast car to drive .(the little engine that could)
I have verry good succsess driving Honda,Acuras
I like all the comments
Stormpower Race Engines
WCS Motorsports
 
I have one, its an ex Motorolla cup/ grand am car. I'd agree with the spring rates recommended. Odly, I don't know mine, it was a pro car and it seems very good already. The car stiffness seems comparable in stiffness to a CRX and Integra R though I've not measured it. They are neat cars, more stable than a CRX, more tossable than the teg. Rev's to 8200 all day.

If you are thinking of building one, let me know and once spring comes around, I can do photo's of the cage, Also, my fabricator here in LaCrosse does excellent cage work for a lot less than you would get in bigger cities.

Ps. The cage rear braces on mine come from about 3/4 of the way up the roll hoop, and they punch through the rear firewall below the window and cross and are tied into the trunk floor. There is also a petty bar gong from the top of the cage to the passenger floor bar mounting.

Also I saw the comment on the hubs, and at least in my experience they appear plenty stout. Much bigger than CRX, In fact mine have lasted so long, I only replaced them because I broke a wheel stud.

Update - 2/27 - See marketplace, my Del Sol is for sale. I'm buying a Type R!
 
Last edited:
I built a multipurpose Del Sol race car. This car is a compromise. It is pretty much IT legal (install few bits). It has a FIA rated cage (built by me) and is also legal for Targa Newfoundland Rally. It has 500/700 rating with stock front bar & a 19mm rear bar. It handles well and is well suited for Targa. Caging a Del Sol is difficult to do right. I studied it for quite a while before fabrication. IMO, its best to bend 1 complete front hoop and attach it to the rear hoop. Below are some pics.
http://users.eastlink.ca/~mcnuttracing/del0.jpg
http://users.eastlink.ca/~mcnuttracing/del1.jpg
http://users.eastlink.ca/~mcnuttracing/del2.jpg
http://users.eastlink.ca/~mcnuttracing/del3.jpg
http://users.eastlink.ca/~mcnuttracing/del4.jpg
http://users.eastlink.ca/~mcnuttracing/del5.jpg
http://users.eastlink.ca/~mcnuttracing/del6.jpg
http://users.eastlink.ca/~mcnuttracing/del7.jpg
http://users.eastlink.ca/~mcnuttracing/del8.jpg
http://users.eastlink.ca/~mcnuttracing/del9.jpg
http://users.eastlink.ca/~mcnuttracing/del10.jpg
http://users.eastlink.ca/~mcnuttracing/del11.jpg
 
Back
Top