What length of spring do I need for Koni insert in the AWR mount for the front on a 2nd gen? Been away from this for too long.
What length of spring do I need for Koni insert in the AWR mount for the front on a 2nd gen? Been away from this for too long.
The IT setup usually came with a 10" spring. We use 8" one everything including the EP setup.
Steve Eckerich
ITS 18 Speedsource RX7
ITR RX8 (under construction)
Thanks. I was thinking 8 or 9 inch. The 10 inch looked to be way long.
The 8 inch springs have a better frequency range. The Koni inserts (single yellow) are usually good up to 400-450 and then they tend to occilate.
Steve Eckerich
ITS 18 Speedsource RX7
ITR RX8 (under construction)
Bookmarks