That was the name i couldn't think of, dynomax. That's exactly what i was running, just not stainless steel.
That was the name i couldn't think of, dynomax. That's exactly what i was running, just not stainless steel.
Chris
Unsquishable bug on the way!!!!!
you can check with steve @ seckerich , he has the muffler you need. a muffler that can be repacked with steel wool (ss). the bullet type have filterglass packing in them , it burns out real fast. steve also as one of the fastest rx-7s/its in the southeast , and knows what it takes to be fast. ralph
I also use the dynomax ultraflo...no issues for 3 years and counting
Thanks for the compliment Ralph.
The mufflers we used from Borla are now total crap and last only a race or 2 on a good day. Not sure of everything they changed, but it is no longer good stainless, thinner, and the packing is not secure and blows right to one end and creates restriction. Got pissed and designed my own. No, they are not for sale yet because I have too many other parts I owe people and not enough time. Should be available later this year.
Steve Eckerich
ITS 18 Speedsource RX7
ITR RX8 (under construction)
Thanks everyone for the advice. You gave me several good leads to follow up on.
I spoke with Dave Lemons today and Mazdatrix has two mufflers he beleives will do the job. They are the REV TII presilencer (16425P) and the Universal Muffler (16030). The later is just a bit to tall (deep) in my opinion, so I believe I will go with the first one. It is in reality a Racing Beat product.
Mark, if this is the presilencer you have, I would like to talk to you about it. Please either email me at [email protected] and give me your phone number, or give me a call at (847) 274-0283.
Thanks again.
Rich Walke
ITS RX-7 # 61
The 16425P $249 http://www.racingbeat.com/resultset....tNumber=16425P has a hanger attached as well as flanges at both ends, it's a 3" presilencer. The ones I have used, $99 16435 http://www.racingbeat.com/resultset....rtNumber=16435 (purchased from Mazdatrix) is a bare unit, it's a 3" presilencer. I do not know if there is any difference in the actual presilencer. I can say for sure the 16435 has a very coarse stainless steel packing, I've opened one up before. Might check with Dave, you might be able to save $150 if you don't need 2 flanges and a hanger.
In any case, mine is already pending sale, it picked up interest a day after I first posted. If it falls through I'll let you know.
Mark B. - Dallas, TX
#76 RX-7 2nd Gen
SCCA EP
Former ITS, ITE, NASA PT
Bookmarks