The Spinwerks wheels come in right at 12-13 lbs and are around $175 each, or thereabouts. I'm using a set of those and got the idea from Steve Parrish, another SE Z racer.
The Spinwerks wheels come in right at 12-13 lbs and are around $175 each, or thereabouts. I'm using a set of those and got the idea from Steve Parrish, another SE Z racer.
Raon, are the spinwerks neutral offset?
I wish I could remember (I'm away so can't check right now, can when home). However, Spinwerks knew what was right on the Z car. There is a woman there I talked with, she seemed familar with Zs. Their website stinks and the wheels Steve and I have aren't shown on it (as of last summer), but, if you ask for some Z wheels they'll know what you're talking about.
Spinwerkz welds the center of the wheel in when you order them. So you can have any offset you chose.
Steve Parrish
57 ITS Nissan 300ZX
Not that it really matters for a racecar, but do either of you have a picture of the wheels that fit on a z?? They would be a big improvement over what we are curruntly using. (17 lbs or so)
Here you go!
p.s. The company that makes these used to be part of Circle Wheels but they spun off the aluminum wheel division and it became Spin Werkes...
Last edited by Parrish57; 04-03-2009 at 11:08 AM.
Steve Parrish
57 ITS Nissan 300ZX
Bookmarks