-
My setup is very similar to the guys above; 450f/325r springs with Koni sports all around, GC coilovers & front camber plates, Whiteline front/OEM rear sway bars. I run a little less camber; about -3 front and -2.25 rear, and 0 toe at both ends. You should also consider upgrading the rear suspension bushings to spherical bearings, and replacing the subframe bushings with solid bushings. SPL Parts sells most of the pieces to do these, and there are one or two other places that will make them up for you.
Earl R.
240SX
ITA/ST5
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks