Quote Originally Posted by Chip42 View Post
the picup point is the terminal upstream portion of the primary intact ducting as equipped from stock. if there was a snorkel through the fender that ended at some roughly fixed point within that space, you may place a filter or snorkel in roughly that same space. the openings through the fenders may be enlarged for the piping as the piping is open. no other modifcations to the body or other sheetmetal may be made, and no other pickup points are allowed.

what I am reading from you is that you devise an elaborate system to duct the air through the stock inlet location. this would be illegal, a "tourtured" rule as the COA put it.
Where does it say you can open up stock holes in the sheetmetal? Just b/c piping is open doesn't mean that modification to the chassis is...


No permitted component/modification shall additionally perform a prohibited function.