Not completely open guys. Someone on the ITAC can correct me but on the RX7 you can:
Use any ECU and it does not have to go in the case.
Add or replace existing wire (you can not ditch the entire engine harness)
Air flow meter must remain unaltered and in its stock location.
Can't help with microtech-I only use Motec.
86-88 computer is usually trouble free. Just hard to get fueled enough without those funny purple injectors I see guys running.
Steve Eckerich
ITS 18 Speedsource RX7
ITR RX8 (under construction)
Bookmarks