Those nets were purchased as a unit with the upper bar and latch already installed. A real PITA to replace. All the later cars used a heim joint in the rear and the seat belt style clip in the front. You can cut the latch off and replace the net. Leave 1/2 inch on either side to tig the latch back on. Lower should be a wrap around with clamps. I might have one on the shelf like you have but won't be back in town til Monday night. Is that soon enough?
Steve
Steve Eckerich
ITS 18 Speedsource RX7
ITR RX8 (under construction)
Bookmarks