Quote Originally Posted by Z3_GoCar View Post
Here's a cheap and easy solution. Take some rubber fuel line and clear or black silicone sealer. Split the hose with a knife and glue it on the cut door edge with the silicone and let dry. Viola, no more sharp edge and you don't need the aluminum sheet. As for the door opener, I have the stock pull rod run through a split clamp and bent at an angle to make a little pull lever with a short length of fuel hose glued on the end.

James
I use the panel edging that Pegasus sells. It is made for various panel thicknesses and holds fast. Makes for a very nice looking fnish.