Originally Posted by
GTIspirit
Instead of paying $$$ for the factory 16V P/S-alternator bracket, can I just make my own? Provided that it is similar to the factory one?
GCR 9.1.3.D.1.p
Only catch is I can't make cast iron, so it would have to be made with angle iron. But otherwise it would mount the alternator and P/S in the same location as the pricey factory bracket. A/C has been removed, and I'd like to mount the alternator lower, in the same place as the A/C compressor, same as the factory bracket which is hard to find and pricey.
Even if you can make a bracket identical to the stock bracket, or decide to buy one, I don't see any allowance for you to move the mounting point of your alternator.
Marty Doane
ITS RX-7 #13 (sold)
2016 Winnebago Journey (home)
Bookmarks