What is the difference between the '90 Si and Std flywheel and pressure plate? I need to make sure that I have the right one. There are different part numbers.
What is the difference between the '90 Si and Std flywheel and pressure plate? I need to make sure that I have the right one. There are different part numbers.
Spanky | #73 ITA 1990 Honda Civic WDCR SOLD | #73 ITA 1995 Honda Civic WDCR in progress |
** Sponsored by J&L Automotive (703) 327-5239 | Engineered Services, Inc. http://www.EngineeredServices.com **
Isaac Rules | Build Pictures
HF/STD flywheel would be about 15 pounds, DX/Si flywheel about 18 pounds.
HF/STD/CX/VX
http://i107.photobucket.com/albums/m307/bo.../flywheelVX.jpg
DX/EX/Si
http://i107.photobucket.com/albums/m307/bo.../flywheelDX.jpg
BoneSpec Transmissions
Honda D-series tranny specialist
i think the 88 Si flywheel is different and lighter than the later ones.
1985 CRX Si competed in Solo II: AS, CS, DS, GS
1986 CRX Si competed in: SCCA Solo II CSP, SCCA ITA, SCCA ITB, NASA H5
1988 CRX Si competed in ITA & STL
Civic/CRX 88 only 190mm
Civic/CRX 89 only 200mm
Civic/CRX 90-91 212mm
Civic 90-95 212mm
1990-2000 Civic/Sol are 212mm, but Honda slid some old 200mm clutches into production cars.
BoneSpec Transmissions
Honda D-series tranny specialist
Bookmarks