Jacking Points

[Andy Bettencourt]

It's not hard at all. Guys who do it run a bar with a pad from the cage to the floor. If you don't weld it to the floor, it isn't considered an attachment point. Then when you jack up on the floorpan, you are really utilizing the pad and you won't get any compression of said pan.

[Bill Miller]

It's not hard at all. Guys who do it run a bar with a pad from the cage to the floor. If you don't weld it to the floor, it isn't considered an attachment point. Then when you jack up on the floorpan, you are really utilizing the pad and you won't get any compression of said pan.
[/b]

And if you elect not to repair that rust hole in the floor pan, you can extend that bar down through the hole.