Remote Shifter

[Cheyne]

This is the excellent and key point. The rule should say 'replace'.

I'm on it.


Is that green section you have circled the entire stock and unmodified lever that came in the car? Not a chance....
[/b]

My interpretation it is. The shift knob was bolted to the shift leaver. Unfortuantly the rule books does not define what a shift knob is and allows for any shift knob to be used. The rules also don't define what the leaver is.

Cheyne

[Andy Bettencourt]

My interpretation it is. The shift knob was bolted to the shift leaver. Unfortuantly the rule books does not define what a shift knob is and allows for any shift knob to be used. The rules also don't define what the leaver is.

Cheyne [/b]

I can understand the 'creative nature' of the shift knob wording/allowance but identifying every cars shift lever won't be hard in the tech shed...and the one on an IT car must be stock and unmodified - except for the allowed 'bending'. Need the GCR to define 'bending' as well?

I'm done.

I will go back to my ITCS review where I take every 'you can't' out of there....just 'you cans'.