Put a mark (sharpie) on the input and output shaft. Put the tranny in fifth. One full turn of the input will give ¾ of a turn in the output shaft. Any less than that and it is the wrong ratio.
Put a mark (sharpie) on the input and output shaft. Put the tranny in fifth. One full turn of the input will give ¾ of a turn in the output shaft. Any less than that and it is the wrong ratio.
dick patullo
ner scca IT7 Rx7
oops I got that backwards. 3/4 turn of the input shaft is one turn of the output shaft.Put a mark (sharpie) on the input and output shaft. Put the tranny in fifth. One full turn of the input will give ¾ of a turn in the output shaft. Any less than that and it is the wrong ratio.
[/b]
dick patullo
ner scca IT7 Rx7
Bookmarks