Results 1 to 2 of 2

Thread: ext. window trim removal to add aluminum straps?

  1. #1
    Join Date
    Feb 2003
    Posts
    1,106

    Default

    i am in the midst of adding the 1" wide metal straps to the rear window. my car will be dual purpose ITB and GP. these straps are specifically permitted and recommended for IT. (2007 GCR p. 303)

    if i just rivet them over the top of the window trim, they interfere with opening the hatch.

    i plan to remove the piece as shown on item 8 at:

    https://www.hondapartsdeals.com/honda_parts...component=B++51

    its not real obvious but it goes across the top of item 8 to cover the holes, etc. on:

    https://www.hondapartsdeals.com/honda_parts...component=B++53

    it basically just clips on to some plastic underneath it. if i cut away the sections where the 1/8" by 1" strips will lay, this will not work very well.

    legal or not?
    1985 CRX Si competed in Solo II: AS, CS, DS, GS
    1986 CRX Si competed in: SCCA Solo II CSP, SCCA ITA, SCCA ITB, NASA H5
    1988 CRX Si competed in ITA & STL

  2. #2

    Default

    It's just my opinion but such a trivial omission in the interest of a safety modification seems very reasonable.

    Good luck in Production!

    Charlie Broring

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •