I bought my Schley Products (SP Tools) wheel hub/bearing setup from Toolsource.com about two years ago. Looking at Toolsource's current online catalog (click on link below) they still list the components under SP Tools...but the question is are the components still available. I believe that SP Tools shipped direct to my house after I placed the order though Toolsource. Below is a photo of my set up and a parts list from Toolsource:

http://www.toolsource.com/ost/results.asp?...d_id=&sourceid=



SP Tool # Part Description Price

83500-1 7/8" 9 x 10" Special Bolt (1) $28.95
83500-2 7/8" x 2.45 Special Nut (1) $10.95
83500-3 12mm x 1.5 x 80 mm hub removal bolts (2 needed) $11.75 (each)
83500-7 Pusher Washer 2.438 x 0.700 (1) $18.95
83500-5 3" diameter x 1.8" Sleeve (1) $16.95
86300-3 3 3/8" diameter Cup (1) $29.95

total $129.25

This might be a dead end...which is a bummer. The quality of the SP Tool components are very high since they are made for professional mechanics who use these tools much more frequently than the occasional use frequency of a racer/mechanic. Here's a link to a tech tip I put together awhile back on how to use this tool...hope it helps... http://www.norcalgticup.com/frontwheelbearingr&r.html

Rapid Parts use to rent out the tool...you might check with them to see if they still have one to rent. I think I paid ~$35 to rent it (and had to put a ~$250 safety deposit on it).
http://www.rapidparts.com/

Good luck,

Scott Neville
#44 NorCal GTI-Cup
http://www.norcalgticup.com