Sounds like the timing might be off. Did you pull the main pulley off with the 10mm bolts? The 12a's are all the same and can be put back 90 degrees off. The 2nd gen 13B's are off set and can only go back one way. Line up the small 10mm bolts with the timing pointer and remove the front spark plugs. Take a small wire or tie wrap and insert into the leading and trailing plug holes. When it is on dead top center the wire should go in the same amount trailing and leading. Check that and see what you find.
Bret de Pedro
RP Performance
304-728-6749
MARRS 2005 ITA Champion
Summit Point 12 hour SM 1st place
2004,2005,2006 SSM 2007
Ask about our SM rentals
and trackside support
Bookmarks