Master Kill Switch

[JeffW]

Would anyone be willing to share tips on an effective, efficient, and tidy way to hook up a 4-pole kill switch? The switch will be mounted forward and slightly inboard of the driver's side windshield wiper, with the wiring going through the wall just outboard of the clutch master cylinder.

I need details. Where (not) to cut? Where to lift a lead? Where to make junctions? Common functional checks and troubleshooting. ("I did this with mine the first time and it didn't work because...)

Thanks,

Jeff

[dickita15]

Large cable positive side of battery to large terminal on kill switch.
Large cable other large terminal on kill switch to starter.
#10 wire from alternator output to small terminal on kill switch
#10 wire from other small terminal on kill switch to harness that was attached to alternator.