I must be dreaming... 200lbs weight reduction for my car... i am loving every minute of it...
ur opinions?
Mike
I must be dreaming... 200lbs weight reduction for my car... i am loving every minute of it...
ur opinions?
Mike
http://i19.photobucket.com/albums/b1.../Signature.jpg
I'm too close for guns... switching to bitch-slap!!!
My opinion is you should show up at the ARRC in Atlanta this year...ur opinions?[/b]
<_< haha I wish you well...my vision of 325e's are kinda cloudy...
Evan Darling
ITR BMW 325is build started...
SM (underfunded development program)
SEDIV ITA Champion 2005
sometimes racing or crewing Koni Sports Car Challenge
My answer is that if i lived in the states i would however since i am stuck in Puerto Rico... no ARRC's this yearMy opinion is you should show up at the ARRC in Atlanta this year...
[/b]
or the next couple of ones until i finish college
Mike
http://i19.photobucket.com/albums/b1.../Signature.jpg
I'm too close for guns... switching to bitch-slap!!!
I have an e30 ita 325e in my shop now. At 2550 it should be a very competitive car we have seen 135 to 140 rwhp and 165-170 ft lbs of torque. It has very good brakes and very good handling with the right shocks. Oh yea its rear wheel drive too
people tend to underestimate the eta powerplant(that's ironic "eta POWERplant") however with some slight mods it gets to be competitive this weight adjustment should put us back on the front of the field i hope...
Mike
http://i19.photobucket.com/albums/b1.../Signature.jpg
I'm too close for guns... switching to bitch-slap!!!
These mods - of course - don't include any valve springs other than the stock anemic ones they came with, right? Because - of course - putting in better valve springs to get the engine to rev would - of course - be illegal in Improved Touring... - GA...with some slight mods it gets to be competitive...[/b]
We make those power numbers on the stock spring, new ones from bmw. The trany gearing is pretty good and with the right final drive there is no reason to turn more that 5100 rpm. the stock spring are good to about 5700rpm.
Not only would running double valve springs be illegal - of course- it would be pointless -of course- because the main problem with the 325e engine is its head - of course- and hence would render the new double valve springs useless to the extent that you can not rev it past the 5,700 - 6,000 limit.... OF COURSE...These mods - of course - don't include any valve springs other than the stock anemic ones they came with, right? Because - of course - putting in better valve springs to get the engine to rev would - of course - be illegal in Improved Touring... - GA
[/b]
however ask any bmw racer how much an engine chip liberates the 325e engine... check turner or bimmerworld... and see how much horspower is gained from supersprint or stahl headers which are completely legal - of course.... plus we have plenty of torque to pull us out of those tight delicious corners - of course- so no one needs to be doing anything illegal to be having fun and running competitively - of course...
Mike
http://i19.photobucket.com/albums/b1.../Signature.jpg
I'm too close for guns... switching to bitch-slap!!!
Hey Mike, where did you read this? I just looked in the 2006 GCR and they still have the weight set at 2750lbs.I must be dreaming... 200lbs weight reduction for my car... i am loving every minute of it...[/b]
http://www.scca.org/_FileLibrary/File/06-2...ck-addendum.pdf
GRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRR
Evan Darling
ITR BMW 325is build started...
SM (underfunded development program)
SEDIV ITA Champion 2005
sometimes racing or crewing Koni Sports Car Challenge
YESSSSSS!
I just read that on page 15 and came back to post the link.
Looks like ya beat me to it zracre! :P
Bookmarks