How are the 86-88 and 89-91 front ends different?

[Newbie]

Hi all,

I'm looking to add a front splitter to my '87 ITS RX-7, and I'm wondering what the difference between the 86-88 cars and the 89-91 cars is. ISC has one for the later model, and I'm wondering how to make it work.

Also, any benifit to a rear spoiler?

Steve

[Andy Bettencourt]

[attachmentid=193]

This is the S4 version.

The lower edge is different and if I remember Mike's unit, it is molded to fit it perfectly. The S5 unit provides much bigger stock holes for brake-duct routing.

We like the duck-bill off of the S4 SPORT model for rear.

Here is the S5...

[attachmentid=194]

[Newbie]

Thank's Andy, that helps.

My next question is will an S5 nose fit on the S4? Looks like the leading edge of the front fenders may be different.

Anybody have an extra "duck bill" rear spoiler off of an '86 GTU?

Steve

[Andy Bettencourt]

Originally posted by Newbie@Nov 28 2005, 09:58 AM
Thank's Andy, that helps.

My next question is will an S5 nose fit on the S4? Looks like the leading edge of the front fenders may be different.

Anybody have an extra "duck bill" rear spoiler off of an '86 GTU?

Steve

[snapback]66823[/snapback]

They bolt right up.

As far as the rear spoiler, you really can't lose either way. The DB came on the SPORT model, not the GTU. Keep an eye out on eBay.

Here is another option:

http://cgi.ebay.com/ebaymotors/Mazda-Rx7-R...1QQcmdZViewItem

AB

[ralph mcconnell]

Originally posted by Newbie@Nov 28 2005, 02:37 PM
Hi all,

I'm looking to add a front splitter to my '87 ITS RX-7, and I'm wondering what the difference between the 86-88 cars and the 89-91 cars is. ISC has one for the later model, and I'm wondering how to make it work.

Also, any benifit to a rear spoiler?

Steve

[snapback]66812[/snapback]

steve, you can make a splitter--- out of plywood,check out the arrc photos its #86 and can done for about $40.00. we have used the isc type too. where are you? we run in the sediv and based in charlotte, nc ralph mcconnell

[Newbie]

I'm in SE Wisconsin, Milwaukee area. I ran in Midwestern Council for my first year, but would like to try a few SCCA events next year if time and family allows.

Steve

[RP Performance]

If I remember right I think that the S5 has a bit larger radiator opening also.