Originally posted by johng:
[B]I recently finished assembling and installing el'cheapo base cabinets from Home Depot in my 24'. The nose wall is curved a little, and I suck at wood-working, so to make it easier on myself I put the cabinets on the flat side wall. There's still plenty of room even with the car in there.
Since I have to roll the compressor and tool cabinet from the shop to the trailer each race weekend, I went with some simple "U" shaped steel drawer pulls and screwed them to the wall studs. That way I can use small ratchet straps to tie down the compressor and tool cabinet to the front wall. I'm still trying to figure out a tire rack design, and additional wiring for 110V. The E-track with cross bar thingy sounds pretty good. There's that exact same set-up at
www.awdirect.com
My cheesy weekend project..
$.02
John
[B]
Bookmarks