-
fuel port
I am running a 240sx with a fuel cell, help where do I put the port. any ideas out there.
-
One solution to the Fuel Port Access problem is listed on the Home Page of www.asedan.com, made by a company called Jiffy Tite. All aluminum, with both ends sealed when disconnected, and they come in a varity of ends (barb, SAE, Holley inlet threads, etc), and sizes. I have them in my ITB car, and recommend them. They are not the only solution available, and do cost a few bucks, but they are sanitary, safe, and convient.
Let me know if you have trouble locating them. I do not sell them, just use them.
Good racing. Bill
[email protected]
-
One solution to the Fuel Port Access problem is listed on the Home Page of www.asedan.com, made by a company called Jiffy Tite. All aluminum, with both ends sealed when disconnected, and they come in a varity of ends (barb, SAE, Holley inlet threads, etc), and sizes. I have them in my ITB car, and recommend them. They are not the only solution available, and do cost a few bucks, but they are sanitary, safe, and convient.
Let me know if you have trouble locating them. I do not sell them, just use them.
Good racing. Bill
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks