Originally posted by ddewhurst:
If I am understanding correctly the Ground Control Panhard bar mounts to the drivers side lower control link bracket & on the passengers side to the Watts link bracket on the frame. Non adjustable....
Correct, David. Not only is the RC height non-adjustable, but because of the bend in the panhard bar one can not simply back off the jam nuts and turn the bar to center the axle. I also don't recall whether the rodends were rh/lh, really didn't matter since you had to disconnect and turn the rod ends to center the axle.

All that being said, the GC Panhard bar was a big step up over the stock Watts-linkage, it was cheap, but I am certain there are better alternatives.