Results 1 to 5 of 5

Thread: WANTED: 88-91CRX Driver's black plastic door/window panel

  1. #1
    Join Date
    Mar 2001
    Location
    Winter Park, Florida, USA
    Posts
    383

    Default WANTED: 88-91CRX Driver's black plastic door/window panel

    I don't know what this is called but I need the driver's side door/window black plastic piece. It's just a trim piece and I don't care if the snaps that holds it in place are broken. I'll just silicone it on.



    ------------------
    Richy Gonzalez
    GB Racing - #24 ITA CRX
    Racecar Sponsor: LAMIN-X Protective Films

  2. #2
    Join Date
    Apr 2002
    Location
    LONGWOOD, FL USA
    Posts
    3

    Default

    Richie my buddies crx has them broken off at my house ill see if he wants to get rid of it. he wants to get new ones instead of using those i think so ill see what he says. call me at work mon. if you haven't found them.

  3. #3
    Join Date
    Apr 2002
    Location
    Monroeville, PA USA
    Posts
    541

    Default

    Richy:

    If you are talking about the piece that goes on the bottom half (inner skin-trim panel)where the speakers are-I have both of them along with the sill plates. I am using the top part on the CRX. BTW: some years will be different from others-mine are 1989. Drop me an e-mail if interested ([email protected]).

    ------------------
    Grandpa's toys-modded suspensions and a few other tweaks
    '89 CRX Si-SCCA ITA #99
    '99 Prelude=a sweet song
    '03 Dodge Dakota Club Cab V8-Patriot Blue gonna tow

    [This message has been edited by jc836 (edited April 19, 2003).]

  4. #4
    Join Date
    Mar 2001
    Location
    Winter Park, Florida, USA
    Posts
    383

    Default

    Integramike,
    I'll do that.

    jc836,
    The piece that I'm talking about are on the outside of the door by the door post. If you where to look at the side of the car, it separates the door window from the rear window.

    ------------------
    Richy Gonzalez
    GB Racing - #24 ITA CRX
    Racecar Sponsor: LAMIN-X Protective Films

  5. #5
    Join Date
    Apr 2002
    Location
    Monroeville, PA USA
    Posts
    541

    Default

    Richy:
    The part you are referring to is still available from Honda, I think. We replaced most of the upper trim on our 89 CRX during the build. Reason-14 years in the NC sunshine makes for dry rot in rubber and faded/cracked plastic. If not there are 3 yards in my area that might have a car to salvage from. Look for All Foreign, Best and one other in the greater Pittsburgh area.

    ------------------
    Grandpa's toys-modded suspensions and a few other tweaks
    '89 CRX Si-SCCA ITA #99
    '99 Prelude=a sweet song
    '03 Dodge Dakota Club Cab V8-Patriot Blue gonna tow

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •