Originally posted by RacerBill:
Not completely satisfied with the cage....
found at least one joint that was only partially welded...
main hoop... There is a gap from 1 3/4in to 2 1/2in from the top of the cage to the roof. And the front down tube could have been about 4in farther forward.

Oh, and the tabs on the horizontal shoulder harness bar were welded so close together that I am going to have to move them in order to mount the seat back brace.
Biting my tounge here Bill



------------------
Scott Rhea
It's not what you build...
it's how you build it

Izzy's Custom Cages