Originally posted by Chris Sawatsky:
What if the verticals stop .05mm above the rocker, but are not attached by any means?
Sounds fine to me. We did the same with lifting plates. As long as you can slide a piece of paper under it proving that it's not attached, your golden.

But be prepared to be protested a lot!

Oh, remember the stupid IT rule that all tubing must meet the min. size requirement, unlike Production (which looks like where this cage is coming from) which only requires that the required tubes meet min. spec.
{edit} But looking at the pic again, everything looks like it's at least 1.75" so you should be fine.{/edit}

------------------
Scott
It's not what you build...
it's how you build it


[This message has been edited by Speed Raycer (edited February 04, 2004).]