A word of caution if you use screw-in studs. Red Loctite (the strongest) is good to approximately 400F per Loctite. It is conceivable that your hubs will reach that temp or beyond (mine did). When this happens, all the Loctite goes away and the studs can loosen (mine did) and the lug nuts require tightening every run! The ARP studs are the best way to go even though you will have to remove your hubs to install them. BTW, the best price I found on lug nuts was from the local auto parts store that carries Dorman. Good luck, Chuck

------------------
Chuck Baader
#36 ITA E30 BMW
Alabama Region Divisional Registrar