I'm one of the people Scott referred to as having a failure. I could have said that I had used push on hose for a few years now without problems too - until *this* year.

Second use of hose end, new hose, assembled per mfr's instructions. 250 lb. rated hose, blew off at 110 PSI oil pressure going down the front straight at Memphis. I put hose clamps on to get through the weekend, and have since switched to socket hose.

That was Earl's Super Stock hose. Don't know what the problem was - I guess the only solution is to do what they say, but no one does - pressure test after assembly.

My failure may have been a fluke, but I'm not taking anymore chances.

Good luck,
Steven