I want rebuild my engine this winter and want to start taking apart the spares I have to see what is good and what I can take to be recyled. It looks like the flywheel nut is 34mm and I understand it is torqued to something like 350 ft#'s.

I have an IR 231C impact wrench like this.
http://www.tooltopia.com/index.asp?P...ELAID=81305003.

Before I buy a the wrong size drive socket, will it get the job done or do I need to go to a 3/4" drive socket and breaker bar and a freakin' long pipe?