I'm working on re-wiring my Z car and am almost finished. Everything is good to go, but when I went to crank it I realized I hadn't hooked up the distributor (dizzy). Quick check showed an electronic pickup of some type. Can anyone identify this pickup? I thought it was a Pertronix but I'm not sure. I also don't know how it triggers.

I imagine it should hook up to my white wire on my MSD the way the TR8 and Jensen does, but I'm not sure how that might happen.

I thought to feed it 12V on one side of the pickup, and the other side of the pickup to the MSD white wire.

But, then I thought to feed the white wire from the MSD to one side then the other side of the pickup to ground.

Then, I thought maybe I should be using the mag pickup on the MSD.

Anyone seen this piece before and know how it should be hooked up?

Thanks much,
Ron