i plan to use the stock fuel pump in the stock location. so all of the fuel line changes will be on the low pressure side (pump inlet, regulator return and vent line) and will also be behind the metal bulkhead enclosing the fuel cell.
can i use Aeroquip socketless fittings for this or does it have to be the Stainless Steel Braided?
for more info, see pages 4 of 72 and 5 of 72 at:
http://hydraulics.eaton.com/products/pdfs/...PE-MC001-E2.pdf
my circle track friends swear by this stuff.
tia, tom
1985 CRX Si competed in Solo II: AS, CS, DS, GS
1986 CRX Si competed in: SCCA Solo II CSP, SCCA ITA, SCCA ITB, NASA H5
1988 CRX Si competed in ITA & STL
Bookmarks