I have a rabbit that I have been running at weekend track events and want to enter in SCCA. I have been going back and forth between ITB and G Production, and want to make the descision soon and get the car ready for one or the other. The reason I chose GP is because I have done some things to the car that are not legal for IT but I want to go into ITB because it will be cheaper as far as once I start racing. Another part that really made me reconsider it is that in my area their are only 2 guys that run in GP and a quite a few in ITB including about 3 VW's

I have read the GCR and just need your help to clarify some things as they are propably second nature to you guys.

The cage was built to GP rules so I will need to cut out the braces that go to the front strut towers but thats not too bad, and the rest will be fine for ITB.

Rain Tray - I cut out the rain tray, is that a no no for ITB?

Heater Core - I removed it and blocked it off, I would have to put it back correct?

Dash & Wiring - I removed the dash and all junk wiring and replaced it with a Fiberglass Dash. I know I
need the stock dash and every ounce of wiring. Question is am I allowed to cut the dash inorder to allow for
the A pillar cage bars and also the horizontal bar connecting the two A pillars?

Bumpers - I need to put the bumpers back on correct?

Wheels - I see it says for a Rabbit you need 14's and cant go smaller but for a MKII you can run 13's or 14's is that a mistake or correct, shouldn't it be the other way around? Also what size tires are most of you running.

Rear Wiper - is it ok to remove the rear wiper or would that have to go back in?


Sorry for the lenghty post and thanks in advance.