I replaced my chattering clutch with a Center Force II disc and plate. After 5 to 6 laps it becomes hard to shift and now will not go into gear. I replaced the master,slave, and the hydrolic hose. Checked the collar length and replaced the bearing. Bled the system again. Adjusted the rod on the master out as far as it could go. I also adjusted the slave out. With the clutch in, 1st &2nd will only turn one direction and 3rd,4th,& reverse will spin both directions. I anticipate my max bench press to to increse do to removing the transmission 4 times this past week. Clutch or Trans?
Terry