I could swear I've asked about exhausts before, but I couldn't find the old post. So here goes again: what's everybody running for exhausts/mufflers these days?
We've got a Hotshot header (2-2.25" at collector??)into a 2.5" pipe from the collector rearwards. We just installed a Dynomax bullet (2.5" pipe diam., 16" long) and a turndown; the turndown starts about where the swaybar is.
I haven't heard it, but my co-owner/driver says the sucker is LOUD, basically the muffler didn't do anything but cost us money.
I thought I remember Stretch saying he ran a 3" pipe, with turndown...no muffler.
On the alignment front, we're running Kumhos, so I know the settings are brand-dependent. But we just wanted to get a feel for what everybody else is experiencing. Also, we're running a Quaife diff and heavy/thick sway bars.
We're going to try around -2.5 camber all around, with a little toe out up front, and toe-in on the rear.
Thanks for any suggestions,
Michael
[email protected]