Hi everybody, I recently completed a complete rebuild of my KA24E engine in a 1990 240sx. The problem I'm having is a complete lack of oil pressure... I did prime the pump. I purchased a new oil pump and swapped that out also, so I really don't think that it's the pump. I didn't have an O-ring for the pickup tube, so the first time I put permatex around it, but have since put an O-ring in. I took the timing chain cover back off and resealed the areas between the cover and block. I've turned the engine over with the oil fiter off, and there is pretty much nothing coming out of the block. I've been trying to figure out why there is no oil flow or pressure for over 2 weeks... Any help someone could give would be greatly appreciated before I end up siezing the brand new bearings.
Thanks,
Mike